QSA 210 line array system
The QSA-210 is a two way passive line array speaker. Two neodymium 10” loudspeakers, two 1” neodymium drivers handle a power of 600 watts. It allows high power and precise line array performance to be generated from a column of bi-amped (minimum 6 speakers)cabinets just 60 cm wide making it perfect for medium-sized tours and installations in venues such as theatres. The cabinet is designed for extremely quick set-up and the two-point flying hardware (included) admits two different settings (0° and 5°) for straight line array as well as curved clustering. The express-bar is designed to enable firm fly mount as well as ground-stacking speaker.
QSA 112 portable line array system
The QSA210 Line Array has been proving very performing, flexible and suitable to many important events in the recent years. QUBE is now proud to present the new QSA112 coherent coverage line-array system for sound rental companies, fixed installations, music applications and mobile DJs, thanks to its compact size, portability and versatility. While intended for small/mid venues the QSA112, matched with the dedicated QS118S subwoofer, is designed and built to the same high standards and uses the highest quality components which already characterize QUBE’s serious approach to pro-sound .
The QSA112 delivers extraordinary power handling, clarity, flexibility and, of course, stunning sound in an attractive, easy to handle and affordable package.
BRK
Three ways speaker system
The QUBE BRK is a 3 way trapezoidal full range horn loaded loudspeaker enclosure. Equipped with two 15” (LF) woofers, and a coaxial 10” (MF) woofer with a conscentric 2” exit (HF) driver. The 2” HF driver with a 2.5” diaphram is coupled to a Renkus-Heinz® model - CBH2000-6 Horn, which provides a well balanced frequency response throughout the field of 60° H x 40°V dispersion. Due to the coaxial design of the 10” midrange woofer
and the 2” HF horn, the audio is reproduced from a essentially one-point source,which greatly adds to clarity and transparency of the sound and alsoreduces problems with lobing and comb filtering effects. The extremely highsensitivity of (106 dB 1W/1m) enables high power handling and efficient amplifierutilization, and provides the BRK speaker system the capability of delivering sound pressure levels of 133 dB (RMS) and up to 137 dB (peak). The BRK speaker system handles 2760w - 2x15”: 2000w (LF), 10”: 600w (MF), 2”: 160w (HF) RMS.
This touring specified enclosure is constructed with durable 13-layer, 18mm (3/4”) Baltic birch plywood with a scratch & scuff resistant black paint finish. The BRK cabinet is heavily internally braced for extra stabilization to prevent undesired resonance at extreme sound pressure levels and is equipped with extra-reinforced flying hardware that runs from top to bottom for easy rigging. Ergonomically placed heavy-duty carrying handles assist in transporting and stacking. The QUBE BRK is by sound and size carefully matched to the QUBE RUT Double18” subwoofer. Due to the identical sizes of the cabinets, the handling and rigging for these loudspeaker systems is extremely easy and well balanced.
RUT
Subwoofer speaker system with two 18" woofer horn load.
The QUBE RUT is the companion subwoofer for the QUBE BRK 3 - way full range speaker system. Like the QUBE BRK, the RUT is a trapezoidal shaped cabinet with the same cabinet dimensions. Featuring horn-loaded subwoofer construction with 2 x 18” woofers it is capable of solid sub frequency response from 32 to 150Hz. The horn construction is a 7th order band pass design and due to its excellent transient response, it is able of delivering high definition sub frequencies with an extreme “tight” sound. The dual 18” woofers can handle 2800w (2 ohm) and will produce sound pressure levels of 132 dB continuous and 137 dB peak. This touring specified enclosure is constructed in durable 13-layer 18mm (3/4”) Baltic birch plywood and is heavily braced for extra stabilization and resonance cancellation. The RUT cabinet is equipped with heavy duty handles for easy rigging and stacking and is finished in durable polyurethane black paint. The size and sound of the QUBE RUT is carefully matched with the QUBE BRK in order to simplify stacking / rigging and enhance the overall capabilities of a complete BRK / RUT system.
BRH
Three ways speaker system.
The Qube BRH is a three ways, tri-amp trapezoidal shaped full range enclosure equipped with single high efficiency 15” (LF),10” (MF) in a coaxial construction with 1,4”neodinium driver. The driver is fitted into RH horn which gives a well balanced frequency response throughout the field of coverage (60x40). The Qube BRH integrates the highest quality components with proven technology in a innovative design that delivers an amazing high output level for a cabinet of its size. Due to the coaxial design between the 10” and 1,4”the sound is produced from a one-point source field of frequencies, which greatly adds to clarity and transparency of the sound. The high sensibility (106 dB 1 watt/ 1 m) enables high power handling and efficient amplifier utilization, and gives the loudspeaker capability of delivering a sound pressure level @131dB. The loudspeaker handles in total 1660 watt (1 x 15” 800W, 10 “ 700W, 1,4” 160W) of power. The touring specified enclosure is constructed in durable 13 layer birch plywood and heavily braced for extra stabilization. The cabinets comes as standard equipped with extra reinforced flying hardware that runs from top to the bottom as well as heavy-duty handles for easy rigging and stacking. Qube BRH is by sound and size carefully matched with Qube TRS subwoowers.
TRS
Subwoofer speaker system,one 18” loudspeaker.
The TRS is the companion subwoofer for the QUBE BRH 3 - way full range speaker system.
It can also be used with other Qube speaker systems or for any LF application where high quality,
and high sound pressure levels are desired. The single 18” woofer with a 4” voice coil easily handles
1600 watts program power and delivers 131dB SPL. The cabinet is constructed with durable 13 ply, 18mm (3/4”) Baltic birch plywood and is internally braced for extra stabilization and resonance cancellation. The TRS cabinet is equipped with 4 built in ergonomically placed carrying handles to assist in transporting and stacking multiple cabinets. A heavy - duty perforated steel grille protects the woofer and the cabinet is finished with durable polyurethane black paint.
QSA 118S
Line Array
The QSA118S is a compact, high power, flyable subwoofer
system using a custom 18”woofer in Bass-Reflex configuration.The woofer handles a 1400 watt furnishing a SPL of
132 dB. Built using a 13-layer birch plywood and extra textures
scratch resistant enclosure (18mm / 0.71”) with integrated
handles and mechanical hardware for suspension.1
x 18”(4”VC) B&C®custom woofer granting high excursion
and power handling.Extended frequency response to
35Hz.QSA118S can be suspended or ground-stacked, 35
mm pole-mount socked.Four optional castors facilitate
quicker and easier load ins and load outs.
QSA118Sa
QSA118 SA 18” Bass Reflex Powered subwoofer
The QSA 118Sa is a powered compact bass reflex cabinet subwoofer. It features an Italian manufactured 18” high excursion woofer powered by an 800w RMS CLASS D (PWM) power amplifier. Only the best quality European electronic parts are used in the power amp module circuitry to provide superb specifications, reliability and longetivity. The QSA 118sa has been specifically designed as the companion subwoofer system for the QSA 112A two way line array cabinets, although it can be used with any sound system to provide additional LF reinforcement. Frequency response is from 35 Hz - 120 Hz and a single QSA 118sa provides 129.5 db SPL. The power amp module provides 2 sets of dipswitches with factory presets: 1 set of 4 switches provides 8 different EQ curves to adapt the QSA 118sa’s EQ contour for either ground stacked (4 EQ settings) or flying applications (4 EQ settings) as well as 180° phase reversal. The 2nd. set of dipswitches provides 8 different delay settings, allowing delay adjustments from .25 meters to 32 meters (9.75” - 105 ft.). A rotary potentiometer allows adjustment of gain settings from - 9dB to + 3 dB for precise gain control. Additional power amp module features include: Four LED indictors for the power amps operation status (Power On, Overload, Limit and Protect), a ground lift switch, a balanced XLR - F input connector, a balanced XLR-M Loop output connector to daisy chain the signal input to additional QSA 118sa Subwoofers, an auto resetting AC line circuit breaker, two Neutrik® Powercon AC connectors (one main AC in, and one AC loop out to supply AC power to an additional QSA 118sa or to power two QSA 112A line arrays). This AC loop out powering system eliminates the need to connect lengthy individual AC power cables to each QSA 118sa (or two QSA 112A line array cabinets) from the main AC power source and allows a quicker, more convenient multiple array cabinet system set up whether in a suspended or a ground stacked permanent or portable system configuration. The QSA 118sa cabinet is constructed with 18mm (3/4”) Baltic birch plywood and finished with scratch and scuff resistant black paint. Ergonomically placed integrated handles and mechanical hardware for suspension with a 10:1 safety factor are provided. The QSA 118sa also features a top mount 35mm (1?”) satellite pole mount. With use of the optional QUBE SS -210 speaker mounting pole, one or two QSA 112A two way line array cabinets can be placed on top of a QSA 118sa subwoofer. The side mounted hardware is used to securely lock the QSA 112a cabinets together while the SS - 210’s adjustable angle pole provides aiming flexibility. Key Features: ·
Built in 800w RMS Class D (PWM) power module (85% efficiency) ·
QM 115
Two way monitor speaker system; 15” woofer - 2” coax driver
The QM 115 floor monitor features a low profile cabinet design employing a COAXIAL 15” LF woofer, a concentric mounted HF driver with a 3” titanium diaphram and a 2” exit. The use of a coaxial speaker is quite close to a one point source and offers 70° conical dispersion which excels for monitoring applications Vs conventional floor monitors employing a individual woofer and a separate HF horn / driver. The result is a monitor with an excellent vocal presence, clarity, and provides flat response without coloration as well as superior anti feedback resistance. The built in full range passive crossover, also offers bi amped operation via a switch on the input panel. The QM 115 is capable of up to 133dB SPL allowing it to be used in concert applications where instrument stage volumes can sometimes overwhelm monitor mixes. The QM 115 also excels as a Drum monitor especially when it is used along with a QS 115 or QM 118 subwoofer. The cabinet is constructed with 18 mm (3/4”) Baltic birch plywood, is internally braced to prevent undesired resonance and features a scratch and scuff resistant black paint finish. Six M-10 fly points provide for additional applications as a flying side fill, as a FOH speaker and as a truss mounted front fill.
SP 26 D
Digital controller
The SP 26 features 2 inputs and 6 outputs, with each of the six outputs featuring crossover filters, a 5 band parametric
equalizer that also allows configurable high and low shelving filters plus a limiter and delay. Full metering is provided
for the inputs and outputs, with mute and access buttons allowing quick set up and gain adjustments.
Features
· 2 Inputs and 6 outputs provide for multiple crossover formats including full stereo 3 way.
· 6 x 5 band parametric EQ, plus high and low shelving filters.
· High performance limiters on each of the 6 outputs.
· Precise 2.6 ms (less than 1 meter) delay adjustments for perfect driver time alignment.
· 80 non-volatile preset memories.
· 19 User memories
· Full and individual parameter locking .
· Delay linking option allows speaker cabinet alignment while keeping driver alignment.
· Mono sub mix is provided.
· RS 232 interfaces, provide connection to a PC enabling quick and easy updates of
software and presets.
· Universal automatic voltage power supply: accommodates mains voltages from 70v to 260v for worldwide use.
· AES/EBU option is available.
· Preset Manager Software allows easy preset definition.
· Superb sound quality
PA 360
Power Amplifier
The QUBE PA 360 delivers 850w RMS per channel @ 8 ohms, 1200w RMS per channel @ 4 ohms, 1700 w RMS per channel @ 2 ohms, 3400w RMS continuous bridged mono mode @ 4 ohms.
The PA 360 Power Amplifier is for applications where reliability and audiophile sound reproduction are of primary importance. Key features include self-resetting protective circuitry to safeguard against damage and prevent failures, LED indicators for the operation status of each channel, a ground lift switch, a switch for stereo / mono/ bridge mode operation, balanced XLR ins/outs and Neutrik® Speakon outs.The Qube PA 360 Power Amplifier features a port in the rear of the amp to accommodate optional plug in Qube controller modules, which are specially designed to optimize the sound and performance of Qube passive version speakers and to protect them from damage and failure.
The PA 360 is the suggested amplifier for use with Qube QSA 210 LINE ARRAY Speaker,QSA 212 constant curvature line array speaker,Qube QS 218 SUB, Qube BRK and Qube RUT.
PA 300
Power Amplifier
The QUBE PA 300 delivers 550w RMS per channel @ 8 ohms, 900w RMS per channel @ 4 ohms, 1300 w RMS per channel @ 2 ohms, and 2600w RMS continuous bridged mono mode @ 4 ohms.
The PA 300 Power Amplifier for is applications where reliability and audiophile sound reproduction are of primary importance. Key features include self-resetting protective circuitry to safeguard against damage and prevent failures, LED indicators for the operation status of each channel, a ground lift switch, a switch for
stereo/ mono/ bridge mode operation, balanced XLR ins/outs and Neutrik® Speakon outs.
The Qube PA 300 Power Amplifier features a port in the rear of the amp to accommodate optional plug in Qube controller modules, which are specially designed to optimize the sound and performance of Qube passive version speakers and to protect them from damage and failure.
The PA 360 is the suggested amplifier for use with the Q 115, QS 118, the Qube BRH and Qube TRS passive speaker systems.
New Model SP27 Sept. 2009 !!
